Project Management Essay Example for Free

Project Management Essay Moving forward to begin the process of managing the trade show project for LRH Products, it is important that all aspects of the process are performed correctly and efficiently. After studying the Project Management Body of Knowledge (PMBOK) and the nine knowledge areas, I have ascertained that the following three areas are of utmost importance to the success of this project: Project Time Management, Project Human Resource Management, and Project Communications Management. Project Time Management, which contains the sub-areas of Activity Definition, Activity Sequencing, and Activity Duration Estimating is a very important part of planning for the trade show. Activity Definition is perhaps the most crucial aspect of this area. If this step is not thoroughly researched and all scenarios accounted for, it can impact the rest of the planning activities. It is essential to remember that training is one activity which must be properly time managed and added to the schedule, as well. Even one forgotten item can put the entire project behind schedule. Unfortunately, if time is not managed properly, there can be no extensions to the trade show date. Activity Sequencing is a bit less important although it must also be given careful consideration. Oftentimes, the performance of one activity hinges on the completion of another so little regard to this area could also impact the time to achieve all required activities. Activity Duration Estimating can be one of the trickiest parts of the planning process, especially for a new manager who has no first-hand experience dealing with the assigned personnel and little or no knowledge of resource availability. Oftentimes, managers will respond to questions regarding time in an optimistic manner, believing that this is what their superiors want to hear. It does no good to anyone involved to seriously underestimate the amount of time required and can add undue stress to those assigned tasks with no hope of completing them according to schedule as well as detrimentally affecting motivation and commitment. It is vital to always allow enough time to accomplish all that needs to be done – as well as accounting for changes which may hamper progress. Of course, as uncertainty declines, the time estimate becomes ever more accurate (Billows, 2006). Project Human Resource Management entails Organizational Planning, Staff Acquisition, and Team Development. This is important in that one person cannot perform all tasks and requires the help of a team. According to Trade Show Advisor (2008), â€Å"†¦the effectiveness of your exhibit team can make or break your success at any given show†. Deciding on who is best equipped to handle each activity is vital, although when large amounts of personnel are needed (depending on the size of the trade show) it may be necessary to train staff members who might not have prior experience. Particularly for a new manager, it is best to assign tasks based on areas of strength; for instance, it is known that Pat enjoys updating the collateral. This is a perfect assignment for Pat, then, and the effective manager will base goal times on completion around this employee’s schedule vacation in order to ensure it is performed effectively. Dealing with Terry, who can make travel arrangements but often makes mistakes in setting them up, means additional time considerations to perform follow-up on Terry’s work to check for accuracy. Staff Acquisition is another area of consideration. Due to the limited amount of time each assigned employee is available to devote to the project and keeping in mind that unexpected circumstances, such as illness or personal emergencies may occur, it is always wise to have a selection of personnel from which to select as back-up. Ensuring that all staff members are on the same page and communicating frequently will aid in Team Development. Everyone involved must realize that this project is a team effort and commit to doing whatever is necessary to accomplish goals. As well, it is critical to encourage honest and open communication so that there are no surprises as the project nears its end. Staff members must know that it is all right to admit they are not going to make a deadline, in order for the project manager to come up with alternatives before it is too late to fix. Project Communications Management is by far the most important area of the project management plan. A loss of, or breakdown in, communication can have disastrous results for the entire project. If not properly managed, lost or missing communication can mean the staff attending the show are unprepared, or do not have the necessary resources. Within this broad category are the areas of Communication Planning, Information Distribution, Performance Reporting, and Administrative Closure. Communication Planning – deciding who needs to know what – is a topic best addressed carefully. It takes the ability to look at the big picture to best determine who must stay in the loop. Oftentimes, it is assumed that a minor player, such as an administrative assistant, need not be communicated with as much, or as often, as others, but this can be a fatal mistake. Remember that support staff left behind during the trade show itself are the only lifeline between clients and absent sales managers. It is also a good idea to have one staff member who is not attending the show to be fully informed of all activities in the project. Information Distribution is also a key component, especially when deciding how to communicate vital information. It is important to ensure that all team members receive communications in a timely manner and let the project manager know it has been received to avoid later problems or excuses. Similarly, Progress Reporting is an additional area in which it is vital to ensure the manager is working with the most up-to-date information and that all personnel are aware of how their progress, or lack thereof, impacts the entire project. Administrative Closure is the final step in communication of the project. This is where the manager is held accountable for the success of the trade show and the resulting sales leads which must be followed up on after its conclusion.

Making Fimo Beads :: Expository Process Essays

Making Fimo Beads The "Generation X" population of today's society has made the wearing of beaded necklaces containing fimo beads quite a fashion statement. These necklaces contain small, round, colored plastic beads and other intricate beads made out of different colored fimo. Fimo is a synthetic material similar to modeling clay, and can be used to make thousands on types of beads. These beads can then be incorporated into necklaces. However, to accurately describe the process of making this style of bead, a simple pattern will be used as an example. Specifically, the fimo example described will have a pattern with a small, yellow circular center surrounded by three small, green triangles and three small, red triangles. The following process will allow anyone without artistic ability to create a simple, inexpensive fimo bead that can later be used in stylish necklaces. The first step in the process involves taking a trip to a local craft store like, A. C. Moore, or a department store such as Wal*Mart, to buy the necessary supplies. For the example fimo bead, red, yellow, and green fimo must be purchased. To make a complete necklace, other colored plastic beads would have to be bought along with a spool of beading thread and a silver clasp. Also, a sharp flat-edged cutting tool (for example, a razor blade) and a thick, large pin will also be necessary tools in the final stages of the bead making process. Once the supplies are gathered, the bead making process is ready to begin. The fimo color that will make up the center circle in the bead (in this case, yellow) is the color that is first readied. A piece of fimo with the diameter of a quarter and the width of a pencil, is pinched off from the larger slab of fimo. It is then rubbed between both hands in a circular motion until it is warm and no longer cracks when folded in half. Then, from that small, primed piece of fimo, a smaller, nickel-sized piece is pinched and rolled on a flat surface. The fimo is rolled into a cylindrical log that is approximately three inches long. It is important to ensure that the log is not too thin, meaning it does not easily pull apart. Making Fimo Beads :: Expository Process Essays Making Fimo Beads The "Generation X" population of today's society has made the wearing of beaded necklaces containing fimo beads quite a fashion statement. These necklaces contain small, round, colored plastic beads and other intricate beads made out of different colored fimo. Fimo is a synthetic material similar to modeling clay, and can be used to make thousands on types of beads. These beads can then be incorporated into necklaces. However, to accurately describe the process of making this style of bead, a simple pattern will be used as an example. Specifically, the fimo example described will have a pattern with a small, yellow circular center surrounded by three small, green triangles and three small, red triangles. The following process will allow anyone without artistic ability to create a simple, inexpensive fimo bead that can later be used in stylish necklaces. The first step in the process involves taking a trip to a local craft store like, A. C. Moore, or a department store such as Wal*Mart, to buy the necessary supplies. For the example fimo bead, red, yellow, and green fimo must be purchased. To make a complete necklace, other colored plastic beads would have to be bought along with a spool of beading thread and a silver clasp. Also, a sharp flat-edged cutting tool (for example, a razor blade) and a thick, large pin will also be necessary tools in the final stages of the bead making process. Once the supplies are gathered, the bead making process is ready to begin. The fimo color that will make up the center circle in the bead (in this case, yellow) is the color that is first readied. A piece of fimo with the diameter of a quarter and the width of a pencil, is pinched off from the larger slab of fimo. It is then rubbed between both hands in a circular motion until it is warm and no longer cracks when folded in half. Then, from that small, primed piece of fimo, a smaller, nickel-sized piece is pinched and rolled on a flat surface. The fimo is rolled into a cylindrical log that is approximately three inches long. It is important to ensure that the log is not too thin, meaning it does not easily pull apart.

Elements of Americas market economy in a global setting Essay

Mankiw (2006) characterize a market economy as an economic system where the production and distribution of goods and services through free markets and price systems (p. 7). The amounts of products produced are not pre-determined. At the same time, the amount of goods that will be used is not restricted but bound by market forces. Thus, producers and consumers through the interaction of supply and demand create the market by which products and services are consumed and used. The U.  S. is considered as the icon of this market system which is primarily based on Adam Smith’s capitalism (Rothbard, 2004). To fully understand the mechanism of a market economy, an understanding of its key elements is essential. Some of the key elements that will be discussed through this paper are property rights, competition, and profit. To facilitate this task, discussions will be based on the context of the U. S. market economy. The first element for discussion is property rights. Under the U. S. Constitution, property rights provide the owners of a real, personal or intellectual to exercise ownership, control and sovereignty over their proper (pp. 166-170). Thus, owners are able to utilize the property as they want to, use to gain benefit and protect it from harm. They have the right to benefit from it or from its use. The only constraint with the practice of these rights is that they should contravene any law or inhibit the rights of others (Mankiw, 2006). Competition is described to be the rivalry of individuals or parties because of common or dependent interest (p. 699). In a free market, Rothbard (2004) suggests that competition is the means by which markets determine which suppliers are best to meet demands. Similar to theories on evolution, the process of competition is a means to ensure quality. Thus, competition ensures that consumers are able to get the best product available. However, Rothbard also points out that competition is also a means of controlling the market internally or externally (p. 12-113). Profit is considered the ultimate goal of any economic enterprise. From an economic perspective, profits can be realized when revenues exceed the total cost of inputs (Mankiw, 2006, pp. 271-272). It is achieved when consumers have the capacity to buy a product at more than cost of suppliers’ production. In a simplistic model, profit is what is gained from using various economic resources. Thus, suppliers will continue to want to produce the product because of the economic incentive of its consumption.

Women and Sexuality in Indian Cinema - 1984 Words

WOMEN, SEXUALITY AND INDIAN CINEMA By Shoma A. Chatterji WORD-COUNT: 1900 Recent films like Tauba Tauba, Murder, Julie and Jism have focussed on something not explored before in mainstream cinema - the sexuality of the Indian woman. Though this has given the director and producer ample scope for exploring the anatomy of the woman in a hundred different ways to lure the box office, the one positive spin-off of these films is that they have uncovered the sexual desires of the Indian woman. The woman need not be beautiful though it is mandatory that she has a beautiful body. The woman need not be single either. Sexuality of women in Indian cinema has historically been ignored so far as women’s autonomous expression of†¦show more content†¦The top-angle shots painfully bring across Phoolan’s vulnerability and senseless humiliation, true. But it is also true that for once, Kapoor definitely and unambiguously designs the camera to turn voyeur in a deliberate attempt to attract the attention of a global audience. Not surprising therefore, that the Academy of Motion Picture and Arts chose to rate Bandit Queen among the ten best films ever made. However, the same film also acknowledges the sexual desire of Phoolan when she falls in love with Vikram Mallah. When Vikram is recovering from a gunshot wound in the thigh, in hiding in Kanpur, Phoolan strides atop him and makes love to him like a man, the more aggressive partner in sex. It underscores the mutations in the life and style of an unlettered woman who has been subjected to repeated rape, who has grown into a sexu ally aggressive woman, who no longer shies away from her physical needs. Whether this is a consequence of her acquiring the male masquerade or, is due to her passion for Vikram remains ambiguous. Did Mansi in Basu Bhattacharyas film Aastha commit adultery? This is a rather piquant question since the fact of her sleeping around with men who are not her husband/s is undercut by the fact that she is paid for the services she renders. In other words, she is a prostitute who sells herselfShow MoreRelatedBollywood and Gender1572 Words   |  7 PagesResearch Proposal Aim: To study and compare the role of women in some of the women centric Hindi films released between 1980 to 1990 and 2000 and 2010. Objective: To study the issues of gender, caste, development that were perceived in Indian cinema then and now in women centric films. A comparative study about the representation of women in Indian cinema then and now in women centric films. Scope: There are a numerous women centric films that are created in diverse languages around the worldRead MoreThe Status Of A Woman Essay1846 Words   |  8 PagesWomen have served all these centuries as looking glasses possessing the magic and delicious power of reflecting the figure of man at twice it’s natural Size – Virginia Woolf. The topic that I’ve chosen for my essay is The Status of A Woman in South Indian or specifically Malayalam Cinema. The first question the arises in my mind while watching any Malayalam movie is why does the nationally and internationally acclaimed Malayalam Cinema fail to represent women’s experiences, Why are The Female leadsRead MoreThe Status Of A Woman Essay1935 Words   |  8 PagesWoolf, which goes as, â€Å"Women have served all these centuries as looking glasses possessing the magic and delicious power of reflecting the figure of man at twice it’s natural Size† The topic that I’ve chosen for my essay is The Status of A Woman in South Indian or specifically Malayalam Cinema. The first question the arises in my mind while watching any Malayalam movie is why does the nationally and internationally acclaimed Malayalam or for that matter any South Indian Cinema fail to represent women’sRead MoreBold Gets Bolder : 1990s 2013857 Words   |  4 Pagesarrival of the 1990s, kissing became a common trend on the screen. However, it was actors Karisma Kapoor and Aamir Khan s minute-long kiss in 1996 film Raja Hindustani which caused a stir. Following on the footsteps of their predecessors, new Indian filmmakers took this concept of on-screen boldness to a whole new level. In the 2003 film Khwahish , director Govind Menon made actors Mallika Sherawat and Himanshu Malik lock lips 17 times on screen. The film tanked at the box-office though itRead More100 Years of Indian Cinema - 11448 Words   |  6 Pages100 YEARS OF INDIAN CINEMA Indian Cinema has now completed 100 years on April 21, 2012, a country where over 1,000 films are made every year, in several languages. During these long years Indian cinema has broken many new grounds and established several milestones. The Times of India, Indias major newspaper then, hailed it as the marvel of the century. As writer and essayist Mukul Kesavan wrote, The art of the cinema was fashioned in India at the same time as it was developed in the West. TheRead MoreIndi The Biggest Film Industry1329 Words   |  6 PagesBollywood is almost a religion for the people who live in India; it is the biggest film industry in terms of sale. As Dagnaud and Fiegelson describe the situation, Ranking number one in the world for the film production, being part of the top group of the cinema enthusiast nations, endowed with T.V. channels and with a music industry full of dynamism, India has thus developed an entertainment industry of large size movies playing the role of a launching pad. According to the Telecom Regulatory AuthorityRead MoreCinema As A Mirror Of Society Essay2011 Words   |  9 PagesCinema is considered to be a mirror of society, since ages it has evolved itself with the changing issues and priorities of the vulnerable society. With the passage of time the industry has not only grown in terms of business but has evolved in its core of direction and production. In present times cinema is not considered as a tool of entertainment rather it’s a tool of communication setting agenda’s for audience and vice versa. The subject matter and treatment of Hindi films have changed in currentRead MoreFemale Representation in Hindi Mainstream Cinema2185 Words   |  9 PagesSTATEMENT TO THE PROBLEM Cinema is meant and believed to entertain, to take the viewer to a world that is starkly different from the real one, a world which provides escape from the daily grind of life. Cinema is a popular media of mass consumption which plays a key role in moulding opinions, constructing images and reinforcing dominant cultural values. Hindi cinema has been a major point of reference for Indian culture in this century. It has shaped and expressed the changing scenarios of modernRead MoreIs Sex Education Necessary in School?1123 Words   |  5 Pagesimportant issue. A 2007 ministry of women and child development study shows that over 50 percent of children are sexually abused. Sex is still considered a taboo in India. Parents feel embarrassed to talk openly with their children in this regard. Due to the ignorance of sex education they fall victim to AIDS and other sexually transmitted diseases. Many NGOs are trying to create awareness on AIDS. Sex education can help people to take decisions regarding health and sexuality. It is high time for sex-educationRead MoreQueer Hindi Cinema: A Study On Understanding Lgbt Identities.1852 Words   |  8 PagesQueer Hindi Cinema: A Study on Understanding LGBT Identities Pushpinder Kaur PhD Research Scholar Department of Journalism and Mass Communication Punjabi University, Patiala Email: pushpinder_21@yahoo.co.in Abstract Cinema is undoubtedly the greatest thing to have happened to the queer movement in India. Sexual minority comprises of all those people who fall under the categories of Gay, Lesbian, Bisexual and Transgender. India is one of the many countries where homosexuality is still considered